Door Interface Units – SecuRex Solution Limited

DIU 200

sqxadmin — Sun, 07 Jun 2020 17:32:26 +0000

The compact DIU 200 Door Interface module provides power to a door lock and local power to a CEM reader when a high level of security is required. With its onboard inputs the DIU 200 can be used to monitor conditions such as a fire alarm or activated break-glass condition.

The DIU 200 improves door security by allowing the installer to locate lock controls on the secure side of a door with an intelligent CEM reader on the unsecured side. Upon a valid swipe at the card reader, the reader will instruct the DIU to activate the appropriate output to release the lock.

Features

– Board only DIU module
– Door Interface Electronics held on one board
– Provides ‘coded lock’ serial interface between door hardware and card reader
– On site selectable for 12 or 24 volt lock output
– Fire alarm and break glass inputs for emergency door release
– Designed for ease of installation and maintenance using 2 part connectors throughout
– Optional backup battery connection for emergency power

DIU 210

sqxadmin — Sun, 07 Jun 2020 17:32:25 +0000

The DIU 210 Door Interface Unit (DIU) provides power to a door lock and local power to a CEM reader when a high level of security is required. With its onboard inputs the DIU 210 can be used to monitor conditions such as a fire alarm or activated break-glass condition.

The DIU 210 improves door security by allowing the installer to locate lock controls on the secure side of a door, with an intelligent CEM reader on the unsecured side.

Upon a valid swipe at the card reader, the reader will instruct the DIU 210 to activate the appropriate output to release the lock. As an added benefit, the DIU 210 monitors the status of all standard door monitoring inputs

Features

– Door Interface Electronics held on one board
– Provides ‘coded lock’ serial interface between door hardware and card reader
– Onsite selectable for 12V or 24V lock output
– Fire alarm and break glass inputs for emergency door release
– Designed for ease of installation and maintenance using 2 part connectors throughout
– Backup battery connection for emergency power

DIU 230

sqxadmin — Sun, 07 Jun 2020 17:32:24 +0000

Where a high level of security is required and cabling must be kept to a minimum, the Power over Ethernet Plus (PoE+) DIU 230 offers the ideal solution. The DIU 230 is a complete package that combines Ethernet communication with battery backed lock and door power.

Using a single Cat 5e/6 cable, the DIU 230 eliminates the need for a mains power supply at the door. Where local power is not available, the DIU 230 can offer significant cost savings.

The DIU 230 supports a range of PoE+ mid-spans, offering the highest levels of flexibility, with sufficient power for almost every situation.

Features

– Door and reader power with Ethernet communications via a single Cat 5e/6 cable
– Eliminates the need to have mains power and a power supply at the door
– Current capacity for up to 1.9 Amps
– Provides local power for a full door set including up to 2 Maglocks
– Up to 1.9 Amps available at the door
– Door Interface Electronics held on one board
– Dedicated Fire Alarm, Break glass and Tamper inputs
– Wiegand interface for 3rd party exit reader
– Designed for ease of installation and maintenance
– Onboard battery backup & patented power assist feature