The Type 3 & 4 Lift Control Interfaces directly connects to an elevator floor selection panel. The Lift Control Interface outputs activate buttons on the elevator floor selection panel according to the access permissions of the card holder.

The Type 3 LCI is fitted with two output cards (32 outputs), two input cards (32 inputs), and a power supply unit all mounted in an enclosure. The Type 4 LCI is fitted with four output cards (64 outputs) four input cards (64 inputs), and a PSU all mounted in an enclosure.

Features

– Type 3 Lift Control Interface can support one elevator up to 32 floors
– Type 4 Lift Control Interface can support one elevator up to 64 floors
– Type 3 and Type 4 Lift Control Interfaces connect to the CEM S9032 Lift Controller
– Inputs on the Lift Control
– Interface unit can record which elevator floor selection panel button was selected.
– Reportable Cardholder traceability throughout the buildings floors using AC2000
– Come in lockable wall mount steel enclosures with inbuilt tamper protection

The LCI unit directly connects to a lift floor selection panel. The LCI unit outputs activate buttons on the elevator floor selection panel according to the access permissions of the card holder. The LCI inputs then record which button was pressed.

The Type 2B LCI is fitted with one output card (16 outputs), one input card (16 inputs), and a power supply unit all mounted in an enclosure. The Type 2B LCI links to a DCM 350 board to host an external CEM sPass read head. The external CEM sPass DESFire reader is normally fitted within the elevator cabin adjacent to the floor selection panel.

Features

– CEM S9032 Lift Controller, an intelligent embedded network device for control of lifts within the CEM AC2000 security management system.
– One S9032 lift controller can support up to two lifts.
– Inputs in the Lift Control Interface unit can record which elevator floor selection panel button was selected.
– Reportable card holder traceability throughout building floors.
– Encrypted RS485 communication from the DCM 350 controller to CEM sPass DESFire readers.
– CEM Smartcard with 3DES or AES encryption.
– Type 2B Lift control interface comes in steel enclosure with inbuilt tamper protection.

Using the S9032 Lift Controller, and constituent devices, the CEM AC2000 access control system can provide access control to specific floors within a building.

The card holder enters a lift cab, presents their card to the CEM access control reader, which in conjunction with the S9032 Lift Controller, carries out access checks on the AC2000 database to determine which floors the cardholder is allowed access to. This information enables the floor selection buttons in the cab to operate.

Features

– Intelligent embedded network device for control of lift cabs with the CEM AC2000 system
– Supports two lift cabs with up to 128 floors per lift
– Storage capacity for up to 250,000 card records
– Full TCP/IP based diagnostics/monitoring available via web browser or Telnet
– Cabinet Tamper, AC Power
– Fail, Low battery (when fitted)

The Type 2 Lift Control Interface directly connects to an elevator floor selection panel. The lift control Interface outputs activate buttons on the elevator floor selection panel according to the access permissions of the card holder.

Features

– Can support one elevator and up to 16 floors
– Includes a CEM lift reader controller, which connects to third party Wiegand reader
– Connects to the CEM S9032 Lift Controller
– One S9032 lift controller can support up to two elevators
– Inputs in the Lift Control Interface unit can record which lift floor selection panel button was selected
– Reportable Cardholder traceability throughout building floors
– Type 2 lift control interface comes in a lockable wall mount steel enclosure with inbuilt tamper protection